Hi Guys
I have a Tib 8.1 & also a TiPX. I was recently at a pump & pistols event and I found reloading to be quite a challenge sometimes even if I have 10-round tubes and the like. Tell me your setup and how long it takes for you to reload a mag and also re-fil a mag and the things you've found?
It's going to be down to practice at reloading if you find it a challenge, and finding the right balance for you with regard to magazines, tubes and possibly pots
Not specific to the question but years ago I found that practice and manual loading was easier and quicker for me when i was using a qloader.
Like many people I used an electric hopper and a hose to feed into the qpods, and bought a second set so that I had 10 qpods which I could preload in the morning allowing me to quickly swap qpods between games and reload the empties when convenient
Without a force feed hopper I discovered I was faster if i grabbed a handfull of balls at a time and cupped them over a short hose winding and loading 100 balls into a qpod in seconds
I play a variety of styles and have found that with pistols i am best with a minimum of 3 magazines, extra 8 round tubes and if that's my primary in a scenario then also a 140 pot or two
I would wear magazines on a Molle pouch, tubes slipped in my Molle or other pouches, pot in my pocket or a pouch
12 grams also in the magazine pouch and other pouches - or using a 13ci air system
Quick load by swapping magazines, put the empty in a drop pouch, when convenient refill the magazine from a tube and drop the tube in the drop pouch and the magazine back in the pouch
Again when convenient reload tubes from the pot
If it's quiet then reload magazines directly from the pot
10 round tubes are too big unless you have high capacity magazines. Sometimes I have filled 10 round tubes and had spare balls but it's more practical to have 7 or 8 to match the magazine
Look out for smaller tubes, you may be able to cut down your 10 rounds depnding on the lid or put a bit of foam in the bottom as a spacer