Axe with xsv v2 won't shoot

[luke_bond]

Looking for some help


Just put my XSV v2 into my axe on stock settings


Asa 200psi

Dwell 8

Back cap for velocity


And it shot perfectly well


I then changed the settings as reccomened by boss


Back cap 1.5 turns

Dwell 4

Asa to adjust velocity


And it wouldn't fire a ball the bolt cycles fine but there isn't enough pressure to fire the balls down the barrel, I have a .685 insert in my freak kit and the balls bore to .683 if that helps


I changed the dwell all the way from 4 to 8 at .5 increments but the balls will not shoot, I get the odd snappy shot but I can only get the balls to fire on the stock settings, or more accurately Asa on about 200 and the adjust velocity 1.5 out dwell on 8

I tried new xsv Orings, cleaned and lubed the poppit and put a new battery can't seem to figure it out

Any help is much appreciated


Thanks

 

[Bolter]

Dwell of 8? I ran mine at 30-35 just for reference. I would say your dwell is too low. Think stock dwell is like 28 or something like that.

 

[luke_bond]

Dwell of 8? I ran mine at 30-35 just for reference. I would say your dwell is too low. Think stock dwell is like 28 or something like that.

I have redline board, sorry forgot to mention that

 

[Bolter]

I have redline board, sorry forgot to mention that

Ah I have zero experience with the Redline board, all I can do is leave you a manual

http://www.paintballsolutions.com/05pb_solutions/pdf/manuals/empire/Empire-Redline-Manual_ENG.pdf

 

[luke_bond]

Ah I have zero experience with the Redline board, all I can do is leave you a manual

http://www.paintballsolutions.com/05pb_solutions/pdf/manuals/empire/Empire-Redline-Manual_ENG.pdf

Thanks any help is appreciated

 

[phil-boy]

Luke, I did try a XSV bolt in my Axe with a Redline and to be honest I messed about with the settings and could not get the gun to run as smooth as with the stock bolt and settings. Changed it all back over and never had any further issues running as stock. I personally feel this is the best and have run like this since.

My two penneth.

 

[luke_bond]

Luke, I did try a XSV bolt in my Axe with a Redline and to be honest I messed about with the settings and could not get the gun to run as smooth as with the stock bolt and settings. Changed it all back over and never had any further issues running as stock. I personally feel this is the best and have run like this since.

My two penneth.

Thanks for that @phil-boy, looks like in sending the bolt back to america lol,

I had a bossv2 in my mini and it made a huge difference but it doesn't seem to work the same on my
Axe, not sure if it has anything to do with it being he carbon fibre edition ...

Out of interest do you set your axes to 1.5 out then chrono from Asa? Or just set to 200 and chrono from back?

 

[Bolter]

200 (or a smidge below) and from the back cap.

 

[WingNut]

We always ran ours 200 from the ASA and adjusted velocity from the back cap. Had 14 AXE's on the team and never had a problem with any of them.

online via my uber funky Galaxy Note III

 

[Care_Bears]

go for x 16 blinks with the Dwell ( solid Amber )