Anybody know the size and spec of safer bottle o ring?

[Ben H]

A friends safer bottle blew the oring between the bonnet and the bottle. Somebody advised that the best replacement was a polyurethane one, but does anybody know the exact spec/measurements of the original so it can be replaced?
Many Thanks

Ben

 

[Evil Rich]

You mean the reg o-ring? The bonnet is the upper part of the reg or do you mean the o-ring that actually seals the reg to the bottle?

 

[seba]

There is no orings in any paintball bottles, it is in the regs.

 

[BOD]

There is no orings in any paintball bottles, it is in the regs.

Other than the one that seals the regulator on the bottle which isn't inside the reg.

 

[Evil Rich]

What type of reg is it?

 

[Ben H]

Other than the one that seals the regulator on the bottle which isn't inside the reg.

Sorry should have been more specific as Bod has said its the oring that sits between the reg and the neck of the bottle, so not inside the reg itself. Also the reg isnt a branded one, i don't have it with me as its a mates bottle.
Cheers Guys

Ben

 

[Evil Rich]

113

13mmx2.5mm, normal buna o-rings are perfectly fine and no threadlock ever

 

[BOD]

Sorry should have been more specific as Bod has said its the oring that sits between the reg and the neck of the bottle, so not inside the reg itself. Also the reg isnt a branded one, i don't have it with me as its a mates bottle.
Cheers Guys

Ben

Seeing as regulators and bottles seem to be pretty much universally threaded the same it doesn't really matter what brand the reg is they all take the same size o ring .

 

[Ben H]

113

13mmx2.5mm, normal buna o-rings are perfectly fine and no threadlock ever

Is 13 the inside or outside diameter?

 

[Evil Rich]

Opps sorry, you want 113 sized o-rings, that should be 14mm not 13mm internal diameter.

http://www.ebay.co.uk/itm/113-METRIC-O-RING-10-PACK-SIZE-14MM-ID-X-2-5-W-/290595027428?pt=UK_DIY_Materials_Plumbing_MJ&hash=item43a8d039e4