The Automag picture thread
- Thread starter Gadget
- Start date
Couple of close up shots of my 05 Egomag frame - you can see the Clippard MPA3 ram mounted at the top. This was early in the build before the DM7 break beam eyes were installed
Last edited:
there made by smc I can get them through work if u need themThanks for the pictures it I'm very grateful for that.Can I ask what solenoid your using please?
We are using this minature solenoid supplied by SMC - SMC S070C-SDG-32Thanks for the pictures it I'm very grateful for that.
http://www.airsoldier.com/mm5/graphics/00000001/S070_6003X.pdf
http://www.airsoldier.com/mm5/merchant.mvc?Screen=PROD&Store_Code=AOS&Product_Code=SMC-S070C-SDG-32&Category_Code=SOLENOIDS
Last edited:
Thanks guys.
RS Components have them in stock for £33.34 which is handy. Because the solenoid is only rated at 72 psi are you both using the ULT? On the off chance, does the two pin solenoid plug generally come with the solenoid when you buy them or would I need to buy one separately?
Last edited:
Thats the one yeswe use the ult as the rt takes more pressure and can damage the noid, you will get charged £10 extra from rs as Its a special order item ask around see if anyone wants one and aplit the costThanks guys.
Darn I didn't see the handling charge. Would you be able to get a price for one if it's not too much trouble please Renie?Thats the one yeswe use the ult as the rt takes more pressure and can damage the noid, you will get charged £10 extra from rs as Its a special order item ask around see if anyone wants one and aplit the cost
Heh! I see! No worries I'll give them a shout and sort it out. All I need is the board and I'm sorted.we use RS through work aswell mate