Ego 11 velocity and battery issues
- Thread starter olliewidd
- Start date
I havnt had a chance to fire it yet mate but when I do ill let you know. I gave it a full clean and relube, reset the LPR, changed the solenoid back to factory settings and changed the bolt out (just to see if it makes a difference) Ill put a fresh battery in before I test it too as ive been told that can affect the velocity as well. Really hoping it sorts it out. Otherwise I havnt got a clue lol
Got this from another thread ...
setting on my vicious ego11
dwell- 13.5
fsd comp- 1.0
fsd delay- 4:00
debounce: empty- 3.8
full- 3.8
pull time- 3.8
release time- 3.8
pull point- 55%
release point- 35%
hardware: trigger- opto
solenoid- normal
i keep it set at semi uncapped an i hit a consistant 17bps with peaks of 26.3bps....
noid limiters
front: between 8 and 9
rear:between 6 and 7
LPR... if you look at the front of the LPR, where the adjustment screw is, there is a cone milled into the front, i have the LPR screw flush with the very base of that cone...
with these settings, this ego screams in semi uncapped, and its the single smoothest shooting stacked tube poppet i have, and most of my friends, have shot to date... smoother then any tuned g6r and about as quiet... this summer i am going to do some more tuning on it to see if i can drop the dwell and LPR anymore and still maintain my ROF and +-2 consistency....
the only upgrade i would consider is a VP trigger in the shape that you want... i put the s-class type trigger on mine and to me it made a world of difference ofer the stock PE trigger...
Edited by OEFVeteran, 13 December 2011 - 04:35 PM.
setting on my vicious ego11
dwell- 13.5
fsd comp- 1.0
fsd delay- 4:00
debounce: empty- 3.8
full- 3.8
pull time- 3.8
release time- 3.8
pull point- 55%
release point- 35%
hardware: trigger- opto
solenoid- normal
i keep it set at semi uncapped an i hit a consistant 17bps with peaks of 26.3bps....
noid limiters
front: between 8 and 9
rear:between 6 and 7
LPR... if you look at the front of the LPR, where the adjustment screw is, there is a cone milled into the front, i have the LPR screw flush with the very base of that cone...
with these settings, this ego screams in semi uncapped, and its the single smoothest shooting stacked tube poppet i have, and most of my friends, have shot to date... smoother then any tuned g6r and about as quiet... this summer i am going to do some more tuning on it to see if i can drop the dwell and LPR anymore and still maintain my ROF and +-2 consistency....
the only upgrade i would consider is a VP trigger in the shape that you want... i put the s-class type trigger on mine and to me it made a world of difference ofer the stock PE trigger...
Edited by OEFVeteran, 13 December 2011 - 04:35 PM.