Gog Enemy Barrel Problem

[Caleyjaggy]

Hi all,

I have a GOG enemy (great starter gun). I got a H18 Pro line barrel and last weekend was my first time playing with it. Had a little problem with the barrel coming loose, anyone got some tips for how to stop this from happening.

Thanks

 

[Gadget]

Ion threaded barrels usually have an o-ring behind the threads to prevent them unscrewing - if your new barrel hasn't got one, whip the one off the stock barrel.

 

[Care_Bears]

actually It`d be a good Idea to do that to No-matter what barrel you use, I`ve been doing it since 2005 and has never let me down,
an " O " ring on the screw end works.

 

[Adam Turner]

So are we saying that no matter what barrel you have on your marker, An o-ring will help ?

 

[it8nthot]

So are we saying that no matter what barrel you have on your marker, An o-ring will help ?

I would vote a yes there

 

[Adam Turner]

even with the bog basic barrel that comes with the GOG?

 

[magicmonkey]

You could try wrapping the threads in some PTFE to tighten the fit.

 

[it8nthot]

even with the bog basic barrel that comes with the GOG?

Try it and see if it works - great - if not the suggestion above is good

 

[F3Z]

You could try wrapping the threads in some PTFE to tighten the fit.

Yeh don't do this, it'll tighten the fit for sure but you'll have a nightmare getting it out again. Stick to the o-ring on the barrel. If it's tight to get on you can follow this advice on youtube.

But personally I've always found they go on easy enough.

 

[magicmonkey]

Loads of people wrap the threads in PTFE, including myself with no issue? You don't wanna put loads on, just enough to snug it up.