Angel A1 issues

[fillingham]

Welcome to Angel....

if you still can't figure it out take it down to npf if you're ever close there, still some great techs down there

 

[Jamie.JC.Campbell]

If it moves around when you push it, you should take it off clean the glue off it and the angel then super glue it back on. If its not stuck fast it will lift when the marker firers and push the bit that opens up, sticking the bolt.

 

[olliewidd]

Welcome to Angel....

if you still can't figure it out take it down to npf if you're ever close there, still some great techs down there

Cheers dude. Where is NPF?

 

[olliewidd]

If it moves around when you push it, you should take it off clean the glue off it and the angel then super glue it back on. If its not stuck fast it will lift when the marker firers and push the bit that opens up, sticking the bolt.

Yeah it does wiggle about. Is there any specific kind of adhesive I need to use or will regular old super glue do the trick?

 

[den656]

It will either move around,or if you look the edges of it may be lifting up,causing the breech not to sit properly, either way it is the best way to start as it is the simplest,and cheapest , Jamie is right,if it is in good condition a few people lift it out, clean all the adhesive off,the glue it back in,as long as it is in good condition there is not really a need to change or replace the breech seal at all ,so gluing it is ok ,in my own opinion .

 

[den656]

NPF ,is national paintball fields,it is at Bassetts Pole,Birmingham , or if you do get stuck there is a chap floating around called Mark Smith,who is a tech who is very good, think he has a facebook site setup called the Tech Tent too,and he is in Walsall,or somewhere near there lol .

 

[olliewidd]

It will either move around,or if you look the edges of it may be lifting up,causing the breech not to sit properly, either way it is the best way to start as it is the simplest,and cheapest , Jamie is right,if it is in good condition a few people lift it out, clean all the adhesive off,the glue it back in,as long as it is in good condition there is not really a need to change or replace the breech seal at all ,so gluing it is ok ,in my own opinion .

Yeah the seal lifted out pretty easily, ill clean it and glue it, see if it makes a difference. Otherwise its a trip to birmingham lol