Just got a Geo in a trade...aired it up...shot a few....it started leaking out of the end of the barrel and through the feed neck. I've checked all the o-rings and i've lubed all the bolt. any suggestions?
Geo leak
- Thread starter shootinropez
- Start date
How?
If the Geo leaks down the barrel replace! the 020/70 o-ring at the front of the can, the 017/70 in the can and the 14x2mm on the PropShaft.
Use Eclipse O-Rings and take care you use the right size.
If it still leaks after replacing them and it is an Geo(1) you might need a new PropShaft.
Well i pulled the bolt and can apart and all the o-rings are in tact and tight. I lubed them all but there's stil a leak. i don't have any extra o-rings, I'll get some Sunday and replace them then, but they seem ok to me.
I'm sure it will be a simple fix. There are loads of eclipse techy types who will be able to get you sorted. Try to arrange to meet someone early in the day who may be able to help you.
Often o-rings look ok but will still need replaced.
Often o-rings look ok but will still need replaced.
ok cheers dusty, I'll look out for anyone who's a Planet nut-shouldn't be hard to find at a paintball tournament!
Put up a thread in the announcements section and ask if there's anyone there who'll be able to help 
Most people will be happy to sort you out for the price of a hot coffee on a cold day
Most people will be happy to sort you out for the price of a hot coffee on a cold day
