invert Mini

[haiax0]

Help...

Hey all,

Just bought an invert mini off the sale forum here... cracked it out the box, plugged a full air cylinder in, locked on hopper, turned power on... balls fall out of the barrel once i pull the trigger.... i have allays had a manual paintball gun with no electrics... am i doing something wrong here?

Im a noob i know.... but your help is appreciated...​

 

[tomo110290]

if the mini is anything like the tm7 same interals you might need to worm up the noid with no air in the marker turn eyes off and noid click for about 50 clicks this works on the tm7 is the same prob i had

tomo

 

[haiax0]

if the mini is anything like the tm7 same interals you might need to worm up the noid with no air in the marker turn eyes off and noid click for about 50 clicks this works on the tm7 is the same prob i had

tomo

What do you mean turn off the eyes? im a total noobie with an electric... i have bought new batteries and issues are still apparent... I have taken air off and clicked many times but still nothing.

 

[haiax0]

What do you mean turn off the eyes? im a total noobie with an electric... i have bought new batteries and issues are still apparent... I have taken air off and clicked many times but still nothing.

Ok i have turned the back end round to loosen it off and paint boomed out the barrel! I think i need to run this by some one who has one to make sure im doing this right..

basic use of a paintball marker 101 required haha!

 

[tomo110290]

have alook in your manual how to turn eyes off i think it hold the trigger and turn the mini on you should here a clicking noise

 

[soul snatcher24]

right first thing's first, let me know if this is confusing and i ill explain

set the guage on the asa to 200PSI by changing the allen screw in front

turn the velocity adjustments on the back all the way in and turn up untill you reach 280FPS on the chronograph

make sure the tank is screwed all the way into the ASA (harder on mini than most guns)


if you still have the same problem after that then boot the gun up whilst holding down the trigger (to turn the eyes off) and walk the trigger for around 200 shots (without air) this will reset the solenoid

hope this helps
soul snatcher24