need a smart parts ion armature for the solinoid!!!

[haz2977]

Im looking for a armature for my ion as mine leaks air slightly out of the bottom of it.. any help would be much appretioated guys.. thanks
harry

 

[haz2977]

any ideas guys???

 

[Oily]

I've got a few spare ones in my toolbox.But are you sure this is the problem?Or is it the noid that's at fault?

 

[Lucky_Tech]

got this brand new noid for £10

 

[haz2977]

ive just fitted a brand new virtue board and fitted my old noid to it.. its only just started leaking out of the bottom of the exhaust... i dont no what to do??

 

[Oily]

ive just fitted a brand new virtue board and fitted my old noid to it.. its only just started leaking out of the bottom of the exhaust... i dont no what to do??

Try the simple thing first,a new battery,something like Pro Duracell and not Asda's own

 

[haz2977]

brand new battery already. duracell pro...

 

[Oily]

So your noid was working on the stock Ion board ?
Then you soldered it onto the Virtue board and it worked from the word go or did it start leaking air the moment your aired up your marker?

 

[haz2977]

no just the armature inside of the solenoid i think is leaking air past it. it was fine in the stock board but as soon as i put the armature into the virtue board and gassed it up it started leaking slightly out of the bottom hole in the solenoid.

 

[Oily]

From ZDS site:
Continuous leak from the hole at the bottom of the solenoid.
· Clean the solenoid armature as well as the solenoid housing (where the armature goes).
· The solenoid armature seal may be damaged; replace the armature and try again.
· Solenoid housing (where the armature goes) is most likely scratched; the solenoid will need to be replaced.

http://www.zdspb.com/tech/mguide/ion/trouble_pneumatics.html

Check the above and get back to us