WTD Uk: Promaster Bits

[Hawkins]

Thought I'd Try here first...
going to get an ICD Promaster sometime soon and theres a few bits im going to need for it..

I have Barrels, dont need those

I Need

• 45. Wrap grips ( 2 screws ) not dye stickys i have some already
• Clamping Feedneck that fits a Promaster ( long shot... I.e. CCM)
• Rail And Asa w/ On Off
• Macro line with 2, 90 degree fittings

If you have any or these then please say what fabulous item/s you have along with the price including Paypal and postage. I might ask for a picture to see the condintion so cameras at the ready : )

Cheers

Luke

 

[Care_Bears]

ok mate a few tips about the promasters as i have one:

1. They come with some macroline

2. Feedneck is a Q-lock for an SP Impulse

3. The gun is a low pressure gun, the barrel is 12", anything longer will send the accuracy haywire

4. The Dye Sticky grips will no fit the grip frame as the sticky is now, the back of the grip frame bulges out a bit so the back bit of rubber on the sticky grip will need to be cut for it to fit, and the screws you want come stock with the stock grip they are very small screws, if you use longer screws will bust the noid, but the stock screws will fit a Dye Sticky grip

Hope that helps

Wookie Care Bears Alpha

 

[Bolter]

3. The gun is a low pressure gun, the barrel is 12", anything longer will send the accuracy haywire

Oh really now. And you have proof that anything over 12" effects accuracy? lol! What a random unqualified thing to say!

 

[fkinpaintball]

have a mate with a promaster for sale.. (those ups)

pm if interested

 

[robof9]

ok mate a few tips about the promasters as i have one:

1. They come with some macroline

2. Feedneck is a Q-lock for an SP Impulse

3. The gun is a low pressure gun, the barrel is 12", anything longer will send the accuracy haywire

4. The Dye Sticky grips will no fit the grip frame as the sticky is now, the back of the grip frame bulges out a bit so the back bit of rubber on the sticky grip will need to be cut for it to fit, and the screws you want come stock with the stock grip they are very small screws, if you use longer screws will bust the noid, but the stock screws will fit a Dye Sticky grip

Hope that helps

Wookie Care Bears Alpha

1. cant comment. didnt buy mine new

2. stock feedneck is a push to fit feedneck, impulse/ion/shocker feednecks should fit, altho the actual thread is ICD feedneck thread.

3. the gun is a reccomended LP gun, altho will run fine on hp, and probably better, unless you have a high flow reg on your lp bottle. barrel is fine stock, altho, you would want to see what you like 1st, i like stiffi 14, or a shaft myself

4. as wookie said, i use rl grips. you can use others, like hybrids, but tbh if you dont mind the look of the stock ones, they are comfy, and good grip


would suggest, a better lpr, a better hpr, a high flow valve, altho will be fine stock. the main thing i would get, and did, was a NOX board

ps i have had icd guns since i started ballin. they are real tinkerers guns, if you want, or a great stock starter shooter.

if you do get one and have any issues, give me a shout

 

[balf]

ICD/Smart Parts are the same feedneck thread, apart from shocker NXT thread, which has a few more threads to try and prevent stripping

 

[Care_Bears]

Oh really now. And you have proof that anything over 12" effects accuracy? lol! What a random unqualified thing to say!

i do have proof, i used a 14" at a training session and i would have more luck shooting ants with an ak 47

Wookie care Bears Alpha

 

[Hawkins]

Well Cheers All for All the Info...

feed neck isnt such a problem to get one now...

and cheers robo

Still need some bits mind

 

[cubby]

how?

sorry to mess up the thread but i've got a promaster and wanted to know how to take the feedneck off so i can put a clamping one on?

sorry again

 

[Hawkins]

its a twisting feeed neck... so twist it anticlockwise