Wrong bl**dy side!

[chrismrgn]

I just took delivery of a new Armageddon reg, only prob is that the output is one the wrong side to my eblades regulator.

that shows the prob i have, what can i do. I rele dont want to put a long bit of hosing round all the way cos it would look stupid.
Is it possible to swap the guage and the output on the geddon round??

Cheers for any help, Chris

 

[Silky]

http://67.19.5.132/vb/showthread.php?s=&threadid=40259

may help

 

[chrismrgn]

PROBLEM SOLVED

I just need some Loctite 638 now!
Cheers for the help

 

[L J]

you can unscrew the elbow on the armageddon surely...most regs you can, did that on my flatlines, all the elbow and gauges could be swapped about for customisation

 

[Speedyg4LS]

Surely you realise that if you unscrew the reg (marker reg) so its on the other side and its not gonna come off.
That is how i run mine (actually in the middle) and its perfectly fine!

Speed's

 

[Charlie]

I do the same as speedy. on my trix reg the elbow is on the wrong side of the maker to the bottom line elbow. so instead of struggling to get those little plugs out of another hole on the reg or bottom line I just turned the reg round to the other side. The o-ring on the reg is still far enough in to stop and leaks and the high pressure stops the reg from moving around when gassed up. If your worried about a leak you could always put an o-ring into the top of your asa and then screw the reg in.

 

[Skeet]

Swap teh elbow on teh Black Magic reg to the other side if it suits your grip.

 

[vantrepes]

If you like the inline's fitting where it is, then just switch the output hose, and the output gauge placements. They both lead to the same chamber, and will do the same jobs when they are switched.
Also, if you don't like the placement of the fill nipple, you can switch it with the gauge reading the tank pressure.

Is that one of the new geddons? Any one have an idea when those will be available in the USA?

 

[Skeet]

Geddon should have been avilable first in US as its Air America!!
I think..

 

[chrismrgn]

Originally posted by Skeetmaster
Swap the elbow on the Black Magic reg to the other side if it suits your grip.

Thats what ive done