what reg for a 03 shocker!

[Dave Wiles]

as it says guys!ive herd that you need to take the input pressure down loads or else it turns into a fast as fuk soup maker!what would be the best reg for this is has to be low pressure obviously!im on a kinda tight budget so try recommemd sumit not 2 pricey lol!
cheers guys
dave

 

[Rich H]

2nd hand max-flo's are pretty cheap now

Rich

 

[Skeet]

They allready have a vert reg on them I believe, so, you could get something like a Nitroduck Extreme to go in your bottle, looks like a preset but is actually adjustable...consistent too. £75 notes.

 

[Didz]

ive got a nitroduck extreme on my gat and its sweet.
never let me down

 

[Dave Wiles]

are you using the nitro duck on a shocker?cos the shocker only runs on about 45psi input so it has to be able to keep its very low pressure!

 

[Skeet]

45Psi? I take it thats a Typo....

The ND Extreme is an adjustable reg that looks like a preset, works from about 200-900 psi.

 

[Dave Wiles]

lol it was indeed!what it is is actually 85!im pretty sure it is anyway!cos a team m8 had the problem of having the imput to high so mashing balls!its super low well below 200!what reg cud get it that low??like 85psi odd!

 

[Skeet]

Well, you jsut run the lowest preassure you can, say 200 into the gun, and let the vert reg drop it to whatever its supposed to be...dont forget they run C02 as well, and thats 850psi

 

[Shep]

85psi? he must be running the dwell high for that low an input,
run mine off a low presure maxflow at about 180-190 input,through a voodoo gas though & have no major problems with with it being a blender.
Only time i have had 1 or 2 breaks has been with larger fragile paints such as the rps marbilizer which is possibly due to the sft 'o' ring.
Mine is with vision & only choped twice both times with vision off.
If you do get it running consistantly with no fsdo could you plz pm me & let me know how as i would realy like to get mine running that low

 

[QuackingPlums]

Mine doesn't even shoot unless the input is cranked up to about 180... less than that and the bolt doesn't cycle.

Has never souped up on me... the only problems I've had are when I've had to leave it on but not firing for extended periods, which makes the fsdo drop to something ridiculous - I have to stand there with the gun upside down dry firing for about a minute before the bolt unsticks!

If you have one that runs at 85 it must have the LPR fitted... I can't imagine it running that low otherwise!

Oh, and not all of them came with front regs...