WARPED Ion Roller trigger fit the Ion stock board?

[blockmeister]

just bought the ion stock trigger however the screw doesnt seem to be hitting the (forgot what its called...) button which fires the gun :S the trigger screw seems to be too far to the right... no matter how far i extend the screw never seems to hit the reciever.

any ideas? thanks...

james

(if nobody knows no worries as im heading up warped shop saturday anyway)

 

[SwissTony]

Can you post a pic if possible?
Going by the picture on the website, the screw looks central. Is there any spacers that come with it? or a manual?

 

[biigjim]

hi now i may be wrong coz it's a while since i had an ion, but, i seem to remember that when i fitted my cp trigger, if i turned the screw in the middle of the trigger itself too far towards the grip frame, the screw would actually prevent the trigger activating. try giving the trigger screw a few turns out, and try firing as you are doing it. dunno if that's your problem for sure, but worth a go?

 

[ShimmerShot]

I'v had this problem when i bought my roller trigger aswell. Have you turned the magnetic screw downwards from underneath the trigget frame?

That was what was blocking it when I first installed mine, You need to look underneath your trigger frame to see the hole where you then need to figure out which allen key to use (you have to use the long end of the allan key as its quite away down).

The trigger also stop prematurely because of the length of the trigger, so just abit of heads up on that.

Love the trigger myself, abit chunky but that way you can never miss it

Best of Luck

 

[blockmeister]

i can get it in the trigger frame but it just wont hit the button on the board itself because on the board the reciever is too far right, and the screw which pushes it is central and just misses the board