Warp feed conversions

[SPIKEE]

I have a single 9 volt warp feed and want to convert into the supa-fast 18 volt beast. whats involved ? also how do i go about connecting it to the hopper run outputs that are available on most boards in guns these days. I think it involves moving jumpers but which and where?

 

[benjoshtara]

look in the sticky post regarding changing your warp to 18volt, better still phone jakie or john and get a 10.6 volt rechargeable and charger they take some beating and seem to last forever between charges.
as for the warp interface you need a lead again from agd that will plug in to your race frame and in to the jack socket on your warp
(no need to touch the jumpers)

 

[DangerousBrian]

Originally posted by benjoshtara
look in the sticky post regarding changing your warp to 18volt, better still phone jakie or john and get a 10.6 volt rechargeable and charger they take some beating and seem to last forever between charges.
as for the warp interface you need a lead again from agd that will plug in to your race frame and in to the jack socket on your warp
(no need to touch the jumpers)

yeh, the 10.6 ones are kickass.

not sure if agd will do the cable to fit the race.

you may need to change the jumpers depending on what gun its been set for.

DB

 

[SPIKEE]

cheers guys

 

[TonyF]

18 volt....

18 volt conversion is easy and cheap. If you want info, pm me and i'll send you info on it.

 

[benjoshtara]

You will be able to get a lead from AGD that will plug straight in to a socket on your circut board in your race frame as long as your grip has got the leaf switch rather then the dome switch.