Wanted: Mini Lurker Bolt
- Thread starter Henry.B
- Start date
Honestly i'd go for the Boss Bolt over the Lurker one. It is a pain in the bum. Any lube or paint on the spacer and it comes off.
Are you going from personal experience there or what youve read on forums?
Ive got a lurker bolt and if you put the spacer on properly, with the correct orings, no amount of lube or paint will move it, setting it up on the other hand is a pain, as it will require a chrono and a lot of patience, especially if you have the standard board, was a ball ache with the redline board. But once set up will yield better results than other bolts.
if you have limited patience id just get the boss bolt
and the lurker bolts are cheap enough direct, and don't take long to turn up.
Previous experience 
I've owned the Lurker bolt, Tech-T bolt and now the Infamous bolt - the Infamous one IMO is the best.
I've owned the Lurker bolt, Tech-T bolt and now the Infamous bolt - the Infamous one IMO is the best.
I have the lurker and found if shot below 280fps you get drop off even with the dwell turned right up to 10ms. Had it in my axe for about 3 months hopeing it was just needing breaking in but decided to put the stock back in but will be ordering the infamous bolt later on.
Had to change the inner spacer oring from 014 to 015 and the spacer will not move but just couldnt get it tuned right after 3 months but hopefully you'll have better luck mate
Had to change the inner spacer oring from 014 to 015 and the spacer will not move but just couldnt get it tuned right after 3 months but hopefully you'll have better luck mate
You didnt believe me then lol! MUST HAVE SHINEY THING THAT DOES NOTHING BUT COSTS £100 THEREFORE MUST BE BETTERER.Ah ok, thanks for your advice