Vlocity Settings

[Dicorpo]

When i turn on the hopper and put paint in, it works fine and stuff but like the LED flashes green and the hopper makes weird buzzing sound. In the instructions this says that it's the Tension Mode, but i just wanted to clarify if

1)They're supposed ot do that?
and
2)How can i make it stop if it's not?

Thanks a lot for all your help, all help is appreciated.

Dicorpo.

 

[rayko]

1) Yes, but I cant remember if its suspose to be constant green rather than flashing green.
2) Put it into mode 1

 

[mdking]

mode 1 will be constant green
mode 2 - 8 will be a flickering green, when tennsion is on the paint.... if left for 30secs it will go into standby mode

and yes it does make a humming sound in modes 2-8 all the time....

 

[Dicorpo]

will mode 1 make the feed any slower?

 

[mdking]

mode 1 will not put tension on the paint.. so it will just feed when the eyes cant see paint....

mode 2 - 8 will always but force on the paint, making sure you have the best speed out on the break....

mode 1 is ok, but it will not feed as fast as 2 -9

 

[Dicorpo]

ok, thanks a bunch mate.

Thanks everyone, all is appreciated.

Finally, do you recommend mode 1 or is it better having higher modes?

 

[mdking]

mode 1 is fine for training.... i only use mode 2... eats batterys tho

 

[Dicorpo]

alright, cheers mate. Thanks a bunch all!!!

 

[J@mes]

put it on 8 and watch it munch batterys, i have mine in mode two aswell, i did have it in 8, and it kept popping paint, and then they will refuse to work.

-james

 

[Gee Tee]

I've just got a secondhand vlocity without instructions

Can someone explain how to set the different force feed modes?

TIA

GT