vlocity help

[stevie t]

i have just taken my vlocity apart to clean it and put a new shell on it as i was cleaning it i took the drive cone off to clean under it and a long spring came from it i have tryed to put it in the right place but not sure where it goes anyone help?

 

[Destroyer 105]

That spring is a real bugger took me ages to get it back on. It connects to the impeller and the circle bit of plastic under it(not sure on the proper name) through 2 small holes. Very tricky, I won't be taking my vlcoity drive cone off in while.

 

[YourMUM]

RTFM chap it you look at the bits pf paper that camr with it you will see how it is put together , do it and then re assemble it,

it will run without the spring but you will loose all anty jam ok

 

[Destroyer 105]

my tension spring has just fallen(yes fallen) out of my hopper whilst I was doing a drop test but ive just tryed it without the spring on tension mode 1 and 8 and their didn't seem much differenc(probs cos the spring is gone) but the anti-jam worked fine. Can anyone clear this up for me.
Can the vlocity still use the different tension modes with no spring and if not is it a complete waste of time setting it on mode 8 with no spring?
Thanks Nathan

 

[YourMUM]

The spring is there to soften the blow when it hits the balls.

It will work fine with out it., best to put it on