Virtue board help

[MJ]

I have got a friends smart parts epiphany and have been told it has a virtue board in it.

i just need to know the link to the manual for the board

or if anyone has great knowledge of the board post up instructions

-MJ

 

[dextrus]

go on virtuepaintball.com or type in google virtue paintball they should have downloads for the manuel.

 

[Oily]

With tourney lock off, hold the trigger and turn the marker on. The LED will then cycle through a rainbow of colours and stop on purple. Tapping the trigger will then toggle through the different programming modes:
Programming Mode = Colour
Firing Mode = Purple
Debounce = Green
Ramp Activation Speed = Blue
Ramp Percentage = White
Dwell= Red
Eye Sensitivity = Teal
AMB (Anti-Mechanical Bounce)= Yellow
ABS (Anti-Bolt Stick) = Flickering Green
Max Rate of Fire = Flickering Red


If you want to change the debounce to 2 you would:

1. With the marker off, and and the tourney lock off (press the button on the bottom of the board so the LED flashes green).
2. The LED will now cycle through a rainbow of colors and stop on purple.
3. Tap the trigger once so the LED glows green.
4. Pull and hold the trigger until the LED starts to flash (factory default for debounce is 5, so the LED will flash 5 times).
5. When the LED stops flashing, quickly tap the trigger 2 times.
6. The LED will now flash 2 times, and then flash through the rainbow of colors, and stop on green, indicating the new value has been set.
7. To exit programming mode, shut the marker off.

Need any other info just ask