V35 "Programming"

[chrismrgn]

Rite just got my V35 from planet and fitted it, then read the instructions, and i cant change the speed of the feed.
Would someone in simple (not too simple!) english please run me thru it??
Cheers guys

 

[WingNut]

Push and hold the button for a few seconds until the LED starts to flash green.

Count the amount of times the green LED flashes in quick succesion. The amount of flashes denotes the level you are on.

If you wish to increase the speed of the loader, push the button once for each level you wish to increase to.

I normally have mine flashing 5 times which is one less than full speed.

Rips like a goodun..........

 

[Skeet]

MAKE SURE...the loader is OFF..when you do the above.

 

[chrismrgn]

Originally posted by Skeetmaster
MAKE SURE...the loader is OFF..when you do the above.

Rite, so the halo is turned off, i press the button and it increases the speed? Cos for me it just turns on

 

[Skeet]

With HALO Off:

Press and HOLD button..after a few seconds...light will flash
starts and ends wiith RED, with teh greens in between being the mode...so RED GR, GR,GR, RED is mode 3about 24 bps.
Press button...this will increase mode by one...so you will get four green flashes...etc..p to 6..if you press agaion, goes back to mode 1