Urgent Karni Problem

[Rebel 105]

My dad bought a Karni and is using it for the first time tomorrow morning (UK). However, there is a problem with the Eclipseblade E2 trigger. No paint been through it yet but sometimes it fires pretty quick (11'ish), sometimes it fires at half the speed (4-5) even though the trigger is being activated the same. This stepdown is noticeable and me and my broth have noticed the same. Sometimes it doesn't fire at all for a few seconds

He's been through all the E2 settings and all looks OK. Even set to factory default. Now here's the wierd bit. Rate of fire is affected by light. With the right-hand grip off and in bright light it mostly shoots fast. But grip on indoors its slow. TT Band readings are also affected by light
Breach senser is off at all times.

Can anyone help or is it faulty?

 

[Skeet]

Dont use it with the grip open, as teh beam taht actuates teh trigger, si light sensitive.

Make sure you use a decent hopper...if the gun slows down to around 1-4 bpz, then it means teh eyes arent seeing any paint...make sure your eyes are clean and work.

If you are using dark coloured paint, or half black shell paint...this will affect teh eyes...read teh manula and look at eye sensitivity settings.

http://www.moodypaintball.com/pages/tech/eblade.htm

Read that..and read teh manual.

 

[Rupe]

well if you eyes were on i would say it was you hopper not feeding fast enough but there not so....
If the trigger on the E2 is the same as on the ego and its acticated by light then it wont work well if the grips r of as it needs to be dark for the switch to acivate.
Doubt this will help but theres my 2 pence

 

[Rupe]

dam skeet ur just too fast, what he said^^

 

[Skeet]

Also, in factory fast...eyes off, you will only shoot a maximum of 11 bps.
Make sure you havent set teh trigger stupidly short, as it actually can lower your rate of fire.

 

[Legion]

if its missing shots try changing the battery. i know its back to the basics but it usually gets me all the time!