urgent help needed

[charlie11]

yesterday i got some new hybrid grips and put them on my shocker.
following this i realised that they were disallowing the on/off switch to move properly
i removed them and put the old grips on
now when i turn it on the blue light doesnt flash in either vision or non-vision mode and it will not shoot when gassed up
can anyone help??????
cheers
charlie

 

[Jon S]

Did you take the frame off the gun at anypoint? Sounds like you might have the wire harness in between the switch and the button.

Scroll down to "Wire Harness"

Think that may be it?

 

[charlie11]

i never took the whole grip off teh gun........however the screw may have hit the wiring wen i screwed it in.......im not sure...............tahts why its annoying..
buts that wot i think the problem is yer

any one else got any ideas????

charlie

 

[charlie11]

cummon guys
i need this fixed..................does anybody know wher ei could have it fixed???
charlie

 

[pottts]

first of all try having a look inside the grip frame, and see if you've done any damage.

Have you got a new shocker or old one,

Cos i think that one the new ones the boards have cut outs for the grip screws.

 

[charlie11]

ive looked inside.....and one one side the screw has cut into the solenoid board..........the vertical board is fine but the wiring on the solenoiud has been cut into.
i think it needs a new solenoid board
does anybody know where i can get one and possibly ahve it fitted????
charlie

 

[JackRegan]

oops ... the standard shocker grip screws are too long with the hybrid grips, i had to put some ickle washers in as spacers ..

for a new board, i guess sp .. for fitting take a look at http://www.zdspb.com/tech/skr03/solenoidmain.html

doesnt look to complicated ..