Trilogy Problems

[Hawkins]

hey this is my marker

Trillogy pro
Worr Frame
black Magic Reg
CCM Lpr
slik Bolt / pull pin
CCM Delrin Back Block

I thought id know what the problem was but it beats me...
My problem is my gun wont fire....

the gun cocks but wont acctually fire, ive ajusted the lug and if its to short it still just goes back and forth, ive turned the preasure right down incase it wasnt allowing the valve to open, and turned it up slowly, ive stripped the gun and checked the vavle which is fine and the soldnoid...

so at the moment i have a back block with goes back and forth but no proper Bang from the gun.. As If its in demo mode

Missed a walkon today and would like some help with it please

Thanks

 

[Skeet]

Make sure your SON time sear on timne is gigh enough to release teh hammer

 

[Hawkins]

did that, thats fine... it releases the hammer and the recocks it doesnt release the gas to fire... the front lpr is fine because the ram is working and the hose's arn't blowing off.

Its got to be my regulator thats broken as the preasure is too high for the valve to open....

 

[Skeet]

did that, thats fine... it releases the hammer and the recocks it doesnt release the gas to fire... the front lpr is fine because the ram is working and the hose's arn't blowing off.

Its got to be my regulator thats broken as the preasure is too high for the valve to open....

Can you push on the cocking rod at the back...or slap it with something to open the valve (just see if air comes out)?

Might want to try increasing your high pressure reg, also make sure you are using a HP bottle as cockers prefer 600-850 psi.