Trigger Pull

[BINKY]

HELLO ALL

OK PROBLEM THE TRIGGER ON MY ANGEL IS STICKING. i TOOK MY ANGEL APART TO SEE THAT THE TRIGGER ITS SELF HAS PICK UP SOME GUK AT SOME POINT ON EACH SIDE OF THE TRIGGER ARM. ITS THIS WHICH IS STOPPING MY TRIGGER MOVEING IN THE WAY THAT IT SHOULD. NOW I ALSO CANT GET THE PIN WHICH HOLD THE TRIGGER IN PLACE OUT AS WELL, TRYED TO HAMMER OUT BUT DONT WANT TO HIT IT TO HARD. WELL LET ME KNOW WANT YOU ALL THINK


BINKY

 

[TheRo0sTer]

When I removed mine for the 1st time it took a bit more than a tap! Just make sure you have a steady hand and something soft to lay your Angel on! Also get an exacto knive and scrap some of the crud off if you can! Hope that helps some!

 

[Buddha 3]

I had the same problem with my trigger a while ago too. All that was needed to sort it out was a wee drop of lubricant on both sides of the trigger, where it slots in the frame, and it was sorted.