Has anybody got experience with the Tribal.
I just got a hold of one.
Runs fine, just need some maintanance tips
Thanks
I just got a hold of one.
Runs fine, just need some maintanance tips
Thanks
Tribal
- Thread starter LARSEN
- Start date
keep it lubed
(use Dow 33 - shocker grease)
try not to use co2
if u are, then u have 2 replace the o-rings with ones that will work well with co2
put some BLUE locktite in the AOC set screw so it wont come
loose,
oil the reg 1nce in a while (it should say how 2 in ur manual)
one thing that u may do, is to look at ur selinoid and open it up(be careful not to break ur gasket) and put some shocker grease on the piston(but only if it is bone dry)
One thing that i recommend is to get a sonic LPR and a sonic RED valve, it will help ur gun drastically.
AgEntGuMbAll
(use Dow 33 - shocker grease)
try not to use co2
if u are, then u have 2 replace the o-rings with ones that will work well with co2
put some BLUE locktite in the AOC set screw so it wont come
loose,
oil the reg 1nce in a while (it should say how 2 in ur manual)
one thing that u may do, is to look at ur selinoid and open it up(be careful not to break ur gasket) and put some shocker grease on the piston(but only if it is bone dry)
One thing that i recommend is to get a sonic LPR and a sonic RED valve, it will help ur gun drastically.
AgEntGuMbAll