Tracer feedneck/elbow

[The Dead Dodo]

Hello

Does anyone have a standard 45degree (I think that's the angle) feedneck /elbow for a old Trade pump?

Thank-you

 

[uberjuba]

http://www.store.justpaintball.co.uk/45-degree-adjustable-elbow.html

 

[The Dead Dodo]

Thank-you

 

[Gee Tee]

might not fit a tracer - depends on size of feedneck

some nelspot clones have a 1" neck so you need to check

http://www.baccipaintball.com/gear/elbows.html

Quoted from Bacci website...

"Angled elbows for Automags, Autococker, spyders, vm-68s and pump marker feednecks. These connect the Hopper to the Direct feed of the paintball gun are are available in various sizes for classic pumps or modern semis. Standard vl-200/Revy feedneck size is 1.040. So you will want your markers feed size by 1.040 if you're using a standard feedneck. I'm slowly checking sizes on all markers for the elbows they need. Trracer, Maverick, Tagmaster and Hornet feed necks are slightly larger than 1 inch. 1 inch is tight but it does work. So anything with 1 by X will work."

 

[The Dead Dodo]

Thank-you shall measure when it arrives and look at the two options

 

[Spookls]

try here buddy
http://sheffieldairrifles.co.uk/quick_research.php?keywords=feedneck+elbo&search_in_description=1&pfrom=&pto=&categories_id=&inc_subcat=1&manufacturers_id=&x=0&y=0

 

[The Dead Dodo]

Awesome even cheaper again