Evening ballers, for sale; my WGP Karnivor cocker. I purchased this new a few years back from the states. has had fair use but mostly kept on the shelf gathering dust.
shot counter reads: 13051
It came with an E2 board/frame software ver 1.10 from the factory, has reflective break beam eyes and such. It's timed, and back block distance from body is set as it should, may need to dial the LPR in for ram actuation as its blood easy to knock
Condition - Right the important stuff, I would say its in good condition but things to note:
*There are very small surface marks from when its been laid down and such, but not really noticeable.
*Some small marks on the top of the LPR (see pics) and the nut where it screws into the front block.
*Back block has some marks on top of it, you can see when the bolt is open (under the tooth/fang of the body (see pics)
*Eclipse ASA is in crap condition... put the original back on... it looks better anyway (don't ask why I swapped it :tsk
*Eclipse samurai trigger has some weird marks on it, was like this when bought new.
*Very small scuff in the centre of the vertical reg
Things I've changed on the marker:
*Swapped original "fang" trigger to an Eclipse samurai (original included in sale)
*Swapped the flimsy aluminium pump rod with a stainless steel job.
*Swapped feed neck with low-rise trinity cam-lock (original feed neck included in sale)
*Swapped ASA with an eclipse one (original ASA included in sale)
Included in sale:
*Full cocker thread Freak kit, stainless back and 2 fronts, all inserts; aluminium and 1 stainless.
*Stock Kaner barrel 1 front, 1 back.
*Original box
*New 12v battery wooooo
*IVG Adjuster
*Inline reg adjuster
Looking for £220 all in, including pp fees and postaaaage
any questions please ask
Pics (lots... got carried away, just keep pressing right on the photosteam)
http://www.flickr.com/photos/47489512@N06/5433579305/ - for the mods
http://www.flickr.com/photos/47489512@N06/5433607427/
shot counter reads: 13051
It came with an E2 board/frame software ver 1.10 from the factory, has reflective break beam eyes and such. It's timed, and back block distance from body is set as it should, may need to dial the LPR in for ram actuation as its blood easy to knock
Condition - Right the important stuff, I would say its in good condition but things to note:
*There are very small surface marks from when its been laid down and such, but not really noticeable.
*Some small marks on the top of the LPR (see pics) and the nut where it screws into the front block.
*Back block has some marks on top of it, you can see when the bolt is open (under the tooth/fang of the body (see pics)
*Eclipse ASA is in crap condition... put the original back on... it looks better anyway (don't ask why I swapped it :tsk
*Eclipse samurai trigger has some weird marks on it, was like this when bought new.
*Very small scuff in the centre of the vertical reg
Things I've changed on the marker:
*Swapped original "fang" trigger to an Eclipse samurai (original included in sale)
*Swapped the flimsy aluminium pump rod with a stainless steel job.
*Swapped feed neck with low-rise trinity cam-lock (original feed neck included in sale)
*Swapped ASA with an eclipse one (original ASA included in sale)
Included in sale:
*Full cocker thread Freak kit, stainless back and 2 fronts, all inserts; aluminium and 1 stainless.
*Stock Kaner barrel 1 front, 1 back.
*Original box
*New 12v battery wooooo
*IVG Adjuster
*Inline reg adjuster
Looking for £220 all in, including pp fees and postaaaage
any questions please ask
Pics (lots... got carried away, just keep pressing right on the photosteam)
http://www.flickr.com/photos/47489512@N06/5433579305/ - for the mods
http://www.flickr.com/photos/47489512@N06/5433607427/
