Tippmann TPX with back ASA

[Spydercam]

Thought i would be cool but i´m still not happy using HPA max. fps 260 and believe me i tried everything(disarmed the pressure relief valve replaced spring with metal blot, SHP Reg. 1100psi) may in the future and sommer i go use a small CO2 tank !

...

 

[Spydercam]

...

...

 

[Spydercam]

...

That´s it !!!

 

[frosty]

Silly question have you opened up the hole on the co2 caplet you are using as the expansion chamber?

 

[Spydercam]

Do you mean the empty CO2 in front under the barrel ? (I´m still not shure if i understand your question right, cause i´m german with bad english)

caplet=cartridge ?

I have used a nail to open the CO2 hole to the max. size which is possible for a max. gas flow !!!

 

[frosty]

yes that's what I was asking and you've done what I thought, apparently the reg from the tcr fixes it, im one of the lucky ones I can get to 280 fps from stock

 

[Spydercam]

I read something about that the TCR Valves(haven´t seen one) are a bit different than my TPX one. I think more volume in the Valvebody would get more fps !?!? If you got a pic of inside the TCR Valve ? i would like to have a look at to see the difference !

For example on the Phenom the same Valve System is working fine up to 300fps and more !!!

Here i found a Vid to have a look inside the valve:

Ther you can see that there is alot less material inside the TCR Valve.

I will go see if i can drill some material out of the TPX Valve.

 

[powie]

you could also look at the tech t bolt and spring kits to increase fps

http://www.techtpaintball.com/products.aspx?CAT=4201

 

[Spydercam]

Thanks, yes would be interesting to see what happens with them but i wont spend Money for just a few fps more, if i could test it and if it´s working i would pay for !!!

 

[Spydercam]

Here the Close to finish (T)px (C)ompact (R)ifle, i just go Change the scope which is mounted on a TMC Rail and may i go use a shorter tank reg. for the 13ci tank !?!?!?
The Freak Barrel with E99 Barrel tip, will kill all Paint Problems specialy the fps ones as Long you got a tight enough insert for !!!