Tightening reg on vibe?

[jamiekerr]

Hi all, I can feel on my vibe that the reg, wonbbles everso sligtly.. How would I tighten it up... Which allen key thread do I use thanks JK

 

[Ali]

just twist it, thats if it's the same as the ion.

 

[mushk1n]

^^ do what he said, don't twist the nut at the bottom as this adjusts velocity - again this is on ions, I dnno if they are the same.

 

[jamiekerr]

Yea, not sure it thet same method??

 

[Ali]

grab you reg as tight as you can with your hand, then twist clockwise as tight as you can.
and have you ever removed the reg?? if so there might be a o-ring at the top of the reg which ataches into the gun. if that o-ring is loose, or streched or somthing like that then that might be causing the slight wobble.

 

[jamiekerr]

No I havent touched the reg yet.. Only had marker for about 2 months.. only about 700 balls through it.. Um.. well when I turn it it only turns the grip..on the reg.. So nothing happens?

 

[Ali]

ahhh ok, remove the macr line that ataches to the elbow on the reg.
once you've done that pull the rubber cover down wards, if you cant pull the grip off pull it down as far as you can then you should be able to get better grip.

read: http://www.p8ntballer-forums.com/vb/showthread.php?t=96909

 

[sennz]

air it up. Should stop it from feeling "loose".

 

[jamiekerr]

Take your barrel off. The is a screw near where the barrel screws in on the top. It takes an 1/8" allen wrench. Tighten it up. Problem solved Got this of another forum.. Spoke to a Smart Parts guy.. SOLVED MY WOOBLES....

Jamie Kerr

 

[Ali]

air it up. Should stop it from feeling "loose".

weather it's air'ed up or not it shouldnt woble