Tadao for 05 ego
- Thread starter Kynan
- Start date
to enter setup mode press the middle button with the trigger pressed.
scroll through the menu by pressing the trigger.
scroll till the bottom LED is flashing then press and hold the trigger. then wait a second and watch the LEDS flash with the trigger unpressed. the number of flashes tells you what mode you're in.
not sure which mode you want but the instructions are here anyways -->
http://www.tadaotechnologies.com/downloads/M7_Ego_Manual.pdf
these are for the musashi 7 software and the ego 05.
hope this helps. if you need anything more specific like specific settings and ROF cap, debounce etc etc ... i'd be happy to run you through =D
dip
scroll through the menu by pressing the trigger.
scroll till the bottom LED is flashing then press and hold the trigger. then wait a second and watch the LEDS flash with the trigger unpressed. the number of flashes tells you what mode you're in.
not sure which mode you want but the instructions are here anyways -->
http://www.tadaotechnologies.com/downloads/M7_Ego_Manual.pdf
these are for the musashi 7 software and the ego 05.
hope this helps. if you need anything more specific like specific settings and ROF cap, debounce etc etc ... i'd be happy to run you through =D
dip
not sure what u mean by the flashes and making it flash more but yeh ... in the menu ... scroll till the bottom LED flashes on its own ... press and hold the trigger and give it a sec and the bottom LED will flash. the number of times it flashes is the mode that it's in. 2 flashes for capped semi ... if its not on 2 flashes then after the LEDS have stopped flashing, pull the trigger twice and the LED should flash twice with your trigger pull .... wait for a couple secs then the bottom LED should start flashing again ... TADA ... marker is in semi-capped mode.
to change the ROF you need to do the above but the menu LED is the 1 from bottom LED and flashing .... count the number of flashes it does there and choose the 15.2 BPS cap ... can't remember how many flashes that is but its in the ego manual =)
hope that clears a few things out
to change the ROF you need to do the above but the menu LED is the 1 from bottom LED and flashing .... count the number of flashes it does there and choose the 15.2 BPS cap ... can't remember how many flashes that is but its in the ego manual =)
hope that clears a few things out
15.4 max ROF .... but there aint 15.4 there and plus microelectronic timers have fluctuations in their exact timing so slap it on 15.25 just to be on the safe side ... .2 BPS isn't exactly gonna make all that much difference =p