Stock Mini Trigger Bouncing

[Mclovin101]

I have just pulled my new mini out of its box Doing the normal checks and noticed when I tap the bottle the trigger fires. ( on my check list as it did the same with my old mini and i could never sort it)

I want to get this sorted as i will be playing tourneys’ with this and I’m pretty sure if it does it when it gets checked it will be pulled.

I have played around with the screws but i either doesn’t fire or bounces
to much.

Any help would be good or is it a upgraded trigger. If so can anyone recommend one

Thanks

 

[foot]

You can fit a small spring over the HES magnet, this will stop your trigger bouncing, but fill put slight resistance on each trigger pull.

 

[Mclovin101]

Which is the HES one and is that spring in ya spares kit?

 

[foot]

I took the spring out a ball point pen. Look in the instruction book, it will show you the HES magnet

 

[Mclovin101]

Ah ok i will have a look thanks

 

[foot]

I have a similar spring that was on my trigger of my DM9, you can cut that down and it will fit.

 

[philfull]

glue a small magnet onto the trigger return magnet. I used the one from killa detents. stopped the bounce and hardly changed the feel of the trigger

 

[Mclovin101]

glue a small magnet onto the trigger return magnet. I used the one from killa detents. stopped the bounce and hardly changed the feel of the trigger

Which one is that the top or the bottom. And you used it from what?? Sorry for the questions. I have a spare stock trigger can i use a magnet from that ??

 

[foot]

the magnet on the top of the trigger.

 

[Mclovin101]

Ok will have a look tonight if not will be the spring thing i think