Sticky Ion Trigger

[aran]

Hi,

I seem to have a problem, i have just bought a blade trigger from holmbush paintball shop and they fitted it too.

So soon as i got my ion back everyting was ok and the trigger was fine, but as soon as i got to the feild it started to stick...

The trigger would just stick to the frame, then you would leave it for a bit and it would be fine, then 10mins later it would stick almost every pull...

The trigger does have a magnet.

Thanks in advance

Aran

 

[Oppy]

?

is it the magnet that is sticking the trigger - or have they used none-setting thread lock on the screw?

if its the latter, i had a similar prob on another gun, caused by the thread lock on the screw not setting and becoming sticky all the time - i simply cleaned it off and put on a small amount of new "proper" thread lock which set solid (make sure you leave it long enough to set - get the type model car racers use, thats well wicked! - just visit your local model shop)



Hope that helps

Steve

 

[aran]

?

I think the magnet is strong and sticks thats what i think... but why the in-consistentsy? Why stick now not then? But anyway its being sold soon but i dont want to sell it with a half-broke trigger....

 

[bulldog2k]

If there's very little side to side play, often you need to very gently and carefull ease the sides of the trigger frame apart with something like a screwdriver to stop it binding. Just do it a little at a time.

 

[aran]

Thanks will try. Any more useful suggestions?

 

[SteRoberts]

Id take a look at the grub screws on it, as you fire it they tend to do what they like and adjust the position of the trigger untill it sticks.

Is it the NDZ blade one?

 

[aran]

NDZ

Nah its not NDZ style.

Thanks for help

 

[SteRoberts]

alrite mate.

Both my NDZ blade one for the ion (removed it and put stock back in) and my Eblade trigger did it (planet put a new screw in the trigger that wasnt cack).

Good luck newayz