Star trigger for Ego

[thekid]

ok ppl ,how do we fit one of the above please?

do u have to split the marker,ie take the frame of the body??

please any ideas..........

Dale

 

[GAZ_GB]

Yes you have to take the frame off the body and loosen the grub screw that holds the pivot in in.

 

[thekid]

ok thought as much,so its the 2 screws on front and one back ,then what ,just pull it apart or do i have to watch for anything else??

 

[GAZ_GB]

Take off the right hand side grip pannel and remove the solenoid wiring plug and the eye wiring plug and best remove the hose out of the bottom line.
undo the 2 screws that hold the frame on then side it down and watch the wires don't get jammed
you'll see the grub screw in the triiger with the frame off just loosen it off and push the pin out and pull the trigger down over and to the front to remove it then reassemble but watch you don't over tighten the rear grip pannel screws or you could put a hole in the solenoid.

 

[thekid]

cheers Gaz all done ,many thanks
Dale

 

[binz]

i thinking of getting one of these , have you found it actualy helps ?

 

[mikeanywhere]

Originally posted by binz
i thinking of getting one of these , have you found it actualy helps ?

Personal preference but I think it does!!!