Spytrigger (pumphandle for my Semipump)

[Spydercam]

Here my newest construction made for my Semipump:

Cause it´s not 100% finished there is no vid, Need some fiberglas first !!!

I go try explain the function of the Spytrigger: First move pull the Trigger and the bolt-locking gets unlocked after it moves more backwards to open the breach. After reach the endposition release Trigger and it´s done !!! If you use two fingers one at the gasline and one on the Trigger you will have an easy cocking. I get this idea cause of watching my favorite Wintersport Biathlon and the different cocking Systems they got on the rifles, may we will see the Spytrigger -System there in future !?!?!? cocking with one finger and not with one of the triggerhand should help cock and shoot faster with less movements !!!

 

[Spydercam]

Here i made a vid testing the not 100% perfect Spytrigger:

 

[Bukko89]

Absolutely love this!! crazy but looks ace. If its not too hard to cock with one/two fingers then works perfect. Guessing your going for a matched barrel to stop your balls falling out??

 

[Spydercam]

Thanks !!!
I got a pimped Barrel with detent for.
I´ve cut to single Trigger and fiberglases for perfect fit:

 

[Spydercam]

So i tested onfield at the chronystation but the connetion between bolt and Spytrigger broke cause to weak !!!

Here some pics of the upgraded(repaired) Spytrigger:

I will go fiberglas all together so the bolt and nuts are fixed too. I go try make a fresh vid next gameday !!!

 

[Spydercam]

Here a new vid. of testing the Spytrigger, now with stronger connection between Bolt and Spytrigger !
Need to adjust a bit more for a scratchless movement but this is just Peanuts

 

[Gee Tee]

If you file the trigger to correct shape you could fit one of these

http://www.ebay.com/itm/2-Finger-Double-Trigger-Shoe-for-3-16ths-Slot-Pistol-Triggers-Air-Paintball-/120748163264

 

[Spydercam]

Thanks, yes this one would make it more comfortable but the force you Need(like lift a snickers with one finger) to pull is that low so the 2mm isn´t sharp !!!

Here i made a plan for the Winterpause:
I got some cockerparts in my storage so i thought about building the Spytrigger 2.0 or i go call it the Spypneutrigger !?!?!?
So you will have simple button which you push for open and relase for Close the breach. Not shure which of my many markers i should use for but i think some quit spooler + the new Spytrigger would be a killer pump !!!
Need to think about a nice compact Setup for 3-Way, RAM and LP-Reg. want it more Slim than a cocker front block !!!

 

[Spydercam]

So i had another look into my marker storage !

1st i thought use a Spooler(E1) as Basement:

2nd think this is it, use my E99 install the RAM behind the bolt in the upper tube and using a smaller LP-Reg. than on Picture that fits under the Barrel. Build a Frontgrip for the 3-Way button(Trigger) should be an easy Job !!!

After i´m done i also could build a Special linkage arm so it turns into "Spycocker" but this is more Project for the future but it should be very easy to build:

Hope you understand my plan !?!?!?