Spyder Nitro Problems

[PaCiFiSt_KnIfEr]

I just bought myself a Spyder Shutter and a basic 48 CI/3000 PSI
PMI Pure Energy nitro tank. So the gun gets delivered and when I try to screw in the nitro tank, the regulator gauge hits into the Shutter's drop forward and won't screw in. Is there anything I can do to fix this short of buying a new drop forward?

 

[spyderflashlcd23]

buy a remote, also there is probably more sugestions for this tats just one way to solve it

 

[Philip]

Take the drop forward off.

 

[PaCiFiSt_KnIfEr]

Well I don't want to waste even more money now on a remote system...And I'm not sure if the tank will fit even with the drop forward off. I'm going to a local field's shop tomorrow maybe they can do something.

 

[spyderflashlcd23]

you might as well take the drop fowward off to see if it works (so its a bottom line without a drop forward)untill you go to the shop 2morrow

 

[PaCiFiSt_KnIfEr]

Yeah I guess I'll try it thanks for the suggestions.

 

[joe bob]

instead of a nitro tank and a spyder i would have gotten a beter marker with co2

 

[spyderflashlcd23]

ok joe bob (dont mean to be rude) but he cant go back into the past and change what he has bought, thats why he posted here for help

 

[spyderflashlcd23]

and buy the way air can usually be taken up to your next gun so that is always a good upgrade

 

[Davo at work]

Drop probs

All you need to do is buy a new drop forward with a 'deeper' drop if that makes any sense? in other words one which will not only drop the tank forwards but further down below the marker also, maybe cost you £20 and your problem is solved,

Alternatively get a smaller guage (Dye mini guages are a good choice) I dont know what size your guage is but mine was quite large and the dye ones dont protrude as far out of the reg so should not catch the drop.

ramble ramble .......................................

hope this makes sense