Spyder mr1 not recocking after fire

[obladeo]

One of my mates has bought a spyder mr1 off here the other week. I bought it home to give it a quick test and have the same problem as this guy

I've replaced all the orings
Lubed up
Looked to make sure the bolt is the right way round
I've tried the spring all the way in and out at the back

Still problems.

Anyone got a clue?

 

[burnzy1989]

(1) What you could try and do is strip it down so that all the internalise of the marker are out (so you can clean the frame with some soapy water, use old barrel swab to clean out the top tube and bottom tube top bit where the bolt is and the bottom where the ramer is.), then dry and check and clean all the components and check that the O `rings are the right size on your rammer and bolt, then re assemble and lube all moving parts.


(2) is it firing out air or does it just fire as if their is no air?

Hope this helps

 

[M600]

macro line is clogged or you're low on air buddy

 

[obladeo]

yea cleaning it all out the first day i got it. It's firing air fine and the ball looks like it's coming out at the right fps. Will have another look tonight when i have chance.

Yea the air bottle is fien it's sat at 4000psi will check the micro line tonight

Thanks all

 

[burnzy1989]

Is it all sorted now ?