Speed 05, Software help!!!!

[Demonic69]

Can't tell what board/SW version this marker has.
Possibly version 3, but cannot find any info anywhere!
Any ideas what it's got and if/how it can be re-flashed to something more normal
One Press: Green Constant, 3 LEDs on, trigger doesn't change.
2 press: Orange/Green Alt Flashing, 1 LED, looks like the MROF, goes all the way to 6, 6 ramps like a loon.
3 press: Red/Green4 Leds, looks like Hopper type, only goes up to 4 with the trigger.
4 Press: Green Flashing, 3 Leds, looks like Dwell, up to 6 with trigger.
Then back to Green constant.
Any help appreciated.

Also...
If anyone has a thinner set of feedneck O-rings available that would be ace, my Fat-necked Halo it's a wee bit snug.

Cheers

 

[KitsuneAndy]

http://www.wdp.tv/manuals/speed05manual-1-12-04.pdf

Try that

 

[Demonic69]

You're no help

 

[Uncle Fester]

lips 01707 325007 or wdp 0121 3282228 they are the only people who can flash your board (i think)

 

[WGP4Life]

No way, WDP can do it, and i'm sure you could find a couple more places.

 

[Shades]

Turn your marker on take of the left grip cheek and press the black button once.

The first press will show you what soft ware version you are running. The large LED at the top should not light up but a smaller one will, if the top small red one lights up your running version 7 the latest soft ware.

Also if you’re running laser eyes (you can see red down in your feed neck when the marker is turned on) you are running the latest soft ware (unless you have had the eyes changed over).

 

[Demonic69]

Turn your marker on take of the left grip cheek and press the black button once.

The first press will show you what soft ware version you are running. The large LED at the top should not light up but a smaller one will, if the top small red one lights up your running version 7 the latest soft ware.

Also if you’re running laser eyes (you can see red down in your feed neck when the marker is turned on) you are running the latest soft ware (unless you have had the eyes changed over).

Close, but no cigar. I've read the forums and the manual several times. I get what's supposed to hapen, it just doesn't. The above is what I get, not what is common for 05 Speeds.
And laser eyes will gow red on any software.

 

[Rosie]

And laser eyes will gow red on any software.

True, mine's some pretty old-ass software & it glowed red from the moment I bought it.

Demonic, take it to LIPS or WDP & they'll fix it up for you.

& yeah, where do you get thinner feedneck 0-rings from?? -Never seen any.

 

[Shades]

And laser eyes will gow red on any software.

Laser eyes only came out on version seven soft ware.

Simple just take it to either Lips or WDP and get it sorted (take it to a registered tec not some one who thinks they are)

 

[Shades]

where do you get thinner feedneck 0-rings from?? -Never seen any.

These came as separate o-rings for the A4 and some A4 Fly’s... the ones with the yellow dot on them are the small set.

Failing that dump the feed neck and get a Redz or CP clamping neck from Lips.