Spares for an System X NME

[Codiak]

Spares, bits and advice on System X NME

As the title says, got my hands on a System X NME and am looking for spares for this thing to be able to service it and with any luck get it shooting good again.

Any help from anyone who knows about these things would be an added bonus. So far found the threads on PB Nation a great help.

Also need to get some DOW 55 as thats what they say to use as grease on this thing, where can get some?

It contains a virtue board so that my next port of call for a manual and also has the stock WAS board got details on that so far.

All help and feedback will be welcomed.

 

[Lump]

55 here

http://www.macrolineguy.com/

whats wrong with it ? i had one, just think of it as a timmy and you wont go to far wrong

 

[Codiak]

55 here

http://www.macrolineguy.com/

whats wrong with it ? i had one, just think of it as a timmy and you wont go to far wrong

never had a timmy either only ever owned an ego.

previous owner says the velocity is low, cant get over 140 on a chrono, tehy have replaced all O'Rings and seals etc and their last thought is a spring in the nose cone that could still be the issue. ive got it today and aired it up, it has a leak sounds like its coming from the front block.

 

[Lump]

ok the nut it the front lpr have you moved that ? move both HP and LPR all the way out. move hp in one half turns. the move LPR in and try that

 

[Codiak]

just tried what you said the presssure on teh guage moves but cant seem to stem the sound of air leaking. cant feel any tho either so must be inside i guess.

 

[Codiak]

to try and sum up whats going on, low pressure air is moving the bolt, there is the sound of an air leak which gets louger if you force the bolt forward. When firing the marker there is no high pressure air coming out to move the ball.

any suggestions?

 

[sumo89]

sounds like the valve is letting air escape, that or rammer orings.

 

[Codiak]

any good disassembly guides?, never worked on one and the manual is pants for such things, just gives you an exploded view of all bits not how to take it apart and re-build etc.

I have tried PBnation and they just cover LPR and HPR.