SP MAX-FLO LP on gun with a remote - questions

[zonku]

Hi,

I have an ION with freak barrel and I tend to use good paint(blaze or simmilar) but I still get the inconsistecy problems at the chrono..

I used a PMI 48ci tank with 850 preset and a remote.
Now I would like to use a max flo(lp) in my battle pack plus a remote, but I dont know if such configuration is going to improve consistency..
I dont know weather I should set the max flo on 140PSI(my operating pressure) or set it on 200 and then decreace it on my inline?

Does having low pressure in the remote help to get better consistency or the opposite?

Thanks for all the comments.

Zonku

 

[EELZ]

I think your Ion should be operating at around 180-210 psi for consistency. if your going to use a max-flo I would set it to around 600psi and use your in-line to adjust to 180-220 or where-ever you chrono to fps limit.

If your chronographing at your limit now with your inline set at 140 psi I think you should be turning your dwell down and inline regulator up a bit.(180-210 psi)

also strip and clean the inline reg too.