Smart Parts vibe not firing

[baller11164]

hi all,

I recently upgraded my vibe with a blackheart board and put a marcoline in, now the gun will not fire or even cycle, but when the bottle is removed, i can hear air releasing from the gun. I've lubed the bolt and tried increasing the velocity and nothing, I've also replaced the battery twice.

anyone got any idea's?,

Many Thanks

Adam

 

[Rider]

daft question....

are you trying to fire it with a ball in the breach?
the eyes mean it won't cycle unless there is a ball in there - or you turn the eyes off.

 

[baller11164]

rider

sorry forgot to mention I tried firing it with the eyes off and nothing, i can hear it clicking but no air is running.

thanks for your reply

edit- ive also checked the macroline and its fine

 

[baller11164]

Update

ok, so i took the whole thing abit again and double checked the install and everything looks ok, i put lots of lube on bolt, cleaned the breach. i then tested it, nothing with eyes off or on with a single ball placed ontop, so after the failed test a took the bottle off and tried to fire off pressure and nothing happened, so i went to clean the breach again and as i undid the back a large amount of air vented from the back. so the gun has air pressure in the breach but still will not fire.

anyone got any ideas?

Really need this fixed, does anyone know of a smart parts techy in or around Norfolk?

many Thanks

Adam

 

[Lump]

have you wound the velocity adjustment to far so there is o air gonig to it at all ?

 

[baller11164]

lump

no i turned it a full turn in every direction it can go and fired it and nothing

cheers for reply

 

[Sid Sidgwick]

Remove your macroline from the reg of the vibe and screw your bottle in to check its getting through the asa to your reg.

 

[baller11164]

Sid

cheers sid, will try that tomorrow. the vibe is starting to get to me

i changed the board over to the standard one and still doesnt work, so i think its gotta be asa or reg.

 

[Sid Sidgwick]

Try what I said mate that narrows it down to reg (as doesnt sound like the gun is leaking)

 

[baller11164]

Sid

ok i tried that and air was going though the asa, so it must be the reg, im going to follow the insturctions from here and see whats what, hopefully an oring has broke or somthing easy to fix.

there are no leaks and when the bottle is on i can hear what i think is the bolt move forward. which leads me to thing somthing may be stuck open causing the bolt to be stuck forward. will get back to you

thanks so much for your help lump and sid, much appreciated

Many thanks,

Adam