slothball anodising

[webber]

can anyone help me out on prices as i cant find anything about it on their website?

thanks
Webber

 

[conion92]

the services page is empty

 

[Hoodless ECI]

they charge a setup fee for any job size of £20 (no actuall anno), but it's £6 per one colour piece after that, or £7 for fades, or anything like polish etc

Search button mate

 

[spreadz07]

I will put it here as well.
there is an initial set up fee. This is either £20 or £25 (cant remember if it was £5 cheaper in the deal that WAS going) and this includes NO anodising. this is for preperation etc.
Then ever part you have done after that will be £6 or £7 depending on the finish you require.
If you have a gloss piece you want finished in a different colour but STILL gloss it will be £6. If you want a gloss piece finished in dust it will be £7.
So.....
Gloss to gloss (colour change £6
Gloss to Dust (colour change or not) £7
Dust to Dust (colour change) £6
Dust to Gloss (colour change or not) £7
So if you have a BLUE GLOSS and want BLUE DUST it is £7. The extra £1 is for the FINISH CHANGE and if you want a 2 colour FADE
FADES are £7
Hope this helps
Nige

 

[Hoodless ECI]

...thats what i was meaning to say

 

[Rebel 105]

email them

 

[josh05]

i email'd them about a week ago about prices and here is what they said
hope this helps!

Hello,

The pricing scheme we use is very simple. We charge a standard £25 setup fee for any job, no matter how many parts you would like to have done. After that, to anodise any parts is just £6 per part!

If you would like to change the finish on any part, please add an extra £1 for each part the finish change is required on. That means, for example if you wanted to change a part from having a neutral or dust finish to being a "high gloss" finish, then the part would be £7 instead of £6.

If you would like to fade anodise a gun, please add an extra £1 to all parts, so if the parts were staying the same surface finish but you wanted the gun to fade from one colour to another, each part would cost £7. If you wanted finish change AND fade on you parts, each part would be £8 (£6 base part price + £1 finish change + £1 Fade).

The good news is that we are currently running a special offer. Setup charge has been reduced to just £19.99 for a limited time, so strike whilst the iron is hot!

On top of all this, Return Carriage is FREE!!!!!

I hope this all make sense, Please contact me if you have any further queries.

Kind regards

Jamie