shocker trigger help

[crazy-lacey]

right i have a problem with my shocker trigger whenever i put it in the gun will not turn on because the the trigger is still touching the activation point.

my spring is bent and thins bending down could this make the activation screw longer as it was just on the edge for resistance before. or shall i need to lower the activation part.or does the spring need replacing which was my enitial intention at first glance.


here are some pics of the trigger.

 

[balf]

take the spring out and run it resting and returning on the microswitch or replace the spring, easiest things to do.

or just pick up a new trigger, i think stock sucks but thats me not a fan of sprung triggers anyway.

 

[crazy-lacey]

take the spring out and run it resting and returning on the microswitch or replace the spring, easiest things to do.

or just pick up a new trigger, i think stock sucks but thats me not a fan of sprung triggers anyway.

i am getting a new trigger balf but i will still need it for training.

 

[balf]

see th efirst part of my post.........there are 2 solutions, or if you know someone who might be nice enough to hook you up with say an sft frame that they might not happen to be using at the moment you can just slot that on and use it and just switch at the end of the day, and no not me, you use a max flo, i dont want that aids near my frame

 

[Big Mac]

funnily enough i have an sft frame!

 

[balf]

see....problem solved, apart from the small issue of getting your board out as the NXT has 2 threaded board pins rather that knock out ones, worst idea ever, round one of those bad boys off and your screwed.

 

[Lovetone]

max flo... i dont want that aids near my frame

lmfao