shocker tech?

[Legion]

just bought a shocker which leaks, i dont know nothing about shockers, so looking for a tech (inside the UK) that can fix it.

When you gass the marker up air poors from the bolt area out the feedneck and the barrel. I have lubed the orings in the bolt and still no luck. I think that it may need a new solenoid and orings but i dont know anything about shockers.

an estimate price is also appriciated.

 

[khanzo]

first thing is to take the bolt assembly out and lube all the orings and check they are all okay

http://www.zdspb.com/tech/mguide/shockersft/maintenance_bolt.html

if that dont work, it may be worth asking a team mate or someone you know with a shocker if you can just borrow their bolt assembly for 2 mins and put theirs in, if the leak is gone, its something to do with your bolt, if it carries on leaking its either your noid or the inserts most likely

-Mat

 

[lemonadeX]

Also make sure the LPR isn't set too high/too low which could prevent the bolt from cocking and causing a leak.

-Will

 

[Legion]

1)

When you gass the marker up air poors from the bolt area out the feedneck and the barrel. I have lubed the orings in the bolt and still no luck. I think that it may need a new solenoid and orings but i dont know anything about shockers.

2) no-one else on the team owns a shocker.

if its most likely the noid, where can i get hold of a new one preferably in the UK. i have the money so aftermarket noids do apply.

 

[khanzo]

I would still take the bolt out myself to check, there is no real reason why not, I am not doubting that it hasnt been done already or similar, but I would still do it to check myself,

I am sure if you ask someone nicely at the next event or attend they may be willing to lend you a hand in terms of swaping bolts, especally if ya offer them a pint

-Mat

 

[stevie t]

legion i will swap my bolt with you so you can check if you go to the masters

 

[Legion]

thanks stevie t but i only play NSPL

 

[no-infernomark]

follow all the steps on that link posted above, awesome site and helps soooo much, the bolt is real easy to remove and install again, and thats coming from me.

 

[Lovetone]

Also make sure the LPR isn't set too high/too low which could prevent the bolt from cocking and causing a leak.

-Will

shockers dont have an LPR so theres that one out the window pal.

 

[Fish]

firstly, lube all o-rings, check them all, any slight damage, replace them...

if you do need a new noid, youll need to go direct through smartparts... try whipping an e-mail off to their tech department. but theyll just re-itterate whats been said in here