Shocker SFT

[Gidge007]

right i have a couple of problems with me shocker
firstly i broke the button cover of the board and now wont turn on and im looking for a place to find the pieces and how to fix them on
secondly i seem to have quite a large leek i was told to get a new macroline but after further investigation i believe it maybe coming from just above the asa and i have no idea how

cheers for any help

 

[dazafox]

shocker

If it,s the plastic on/off button which is broken then give warped a ring they may have one,if it,s the switch on the upper board you can get replacements but the have to be soldered on with a iron,warped are the best people to takk to.

 

[Gidge007]

its the one on the actual upper board
kk cheers

 

[balf]

its the one on the actual upper board
kk cheers

You need to try and get a replacement (which is a lot harder than it should be) de-solder the old one then drop the new one on and solder it on, easy peasy 5 min job if that.

Warped or SP themselves will be the best place to try

 

[Gidge007]

wouldnt it be easier and cheaper to get the pieces 4 the board instead of a whole new board

cheers 4 the advice though

 

[balf]

wouldnt it be easier and cheaper to get the pieces 4 the board instead of a whole new board

cheers 4 the advice though

That is what i was saying...you need to get a button, de-solder busted one, re-solder new one on...had just woken up from a killer nap, they can be a bugger to get hold of though, places prefer you to buy a new board from them instead I tried getting hold of a load of switches a while back to no avail

 

[Gidge007]

i seeee sorry problem is i dont actually have a soldring iron thingy...
well i try look 4 one not perticually desperate 4 one

thanks mate