shocker problems :(

[Ollie274]

hi guys, problems with my shocker sft

after trying to remove a surprisingly large 9v. The wiring that connects to the board has broken.(the bit that connects directly from the shocker to the board, if that helps) It seems to have two solder points but i dont want to solder anything that might not need or have to be soldered.

sorry its a bit of a vague description but was never very good with shockers. Any help would be really appreciated.

thanks and all the best Ollie

 

[soul snatcher24]

do the wires go to the eyes or to the solenoid? (to find out just remove the grip frame and follow the wires, remembering to unplug the other wires from the board first)

if they go to the eyes then it is probably easier to get a replacement set of eyes

if they go to the solenoid then you are best off soldering them back in to the connector however i would ask someone that is very good at soldering if you don't feel confident as a solenoid is an expoensive part esspecially as smart parts spares are hard to come by at the best of times

unless you can get it to a repair facility that can simplt change the wires from the solenoid

hope this helps
Ryan, team domination

 

[Jacko]

Solder it up mate.

 

[Jacko]

do the wires go to the eyes or to the solenoid? (to find out just remove the grip frame and follow the wires, remembering to unplug the other wires from the board first)

if they go to the eyes then it is probably easier to get a replacement set of eyes

if they go to the solenoid then you are best off soldering them back in to the connector however i would ask someone that is very good at soldering if you don't feel confident as a solenoid is an expoensive part esspecially as smart parts spares are hard to come by at the best of times

unless you can get it to a repair facility that can simplt change the wires from the solenoid

hope this helps
Ryan, team domination

Sounds like the wire connecting the main board to the top board.

 

[soul snatcher24]

Sounds like the wire connecting the main board to the top board.

oh yeh, forgot that shockers had two boards

 

[Ollie274]

cheers guys, upon closer inspection it is the second board

time to bust out the soldering iron

thanks and all the best Ollie

 

[Biscuit]

www.zdspb.com hope this helps as every diagram you`ll need as a fellow shocker owner
:first: