Shocker Problem - Help!

[Todorov]

Hey

Ive got a shocker , and when i gas it up it sometimes lets me fire 1 shot then doesnt fire at all , even when the air is still in , and sometimes it lets me fire then it leaks out of the front reg (handle tingy) but still allows us to fire but just poors out loads of air from the bottom of it ...

Does any body know what the problem is? Is it just an O-Ring..
Or is it a differant reason.

Thanks

Todd

 

[Rimmington]

Have you made sure the eyes are off?!?

And as for the reg......it happened to me......get the allen key and scew it in abit? i hope this helps


Leak from the bottom of the vertical regulator (adjustment endcap).
Leaks out the adjustment endcap can appear gradually after you fire a shot or be a constant leak of pressure. Same problem for both of these. The following seals can cause this symptom, and should be cleaned.
· Piston o-ring (14/75); clean and regrease.
· Base seal between the poppet and the base (flared section of the poppet and the opposing surface); clean with no grease.
· Base seal 12/90 o-ring; clean with no grease.

 

[Scars]

Sound like FSDO

relativlely common with alot of guns - if your 2nd shot after is fine i wouldn't worry too much about it

* need to read more into it.......

Do yoo have a LPR Manifold on it?

 

[Todorov]

Thats the thing , after the first shot there isnt a 2nd shot it just stops firing as if there no air mate :s god knows whats up

sometimes it lets me fire but at the same time its laeaking like hell out of the reg handle.

 

[Rimmington]

Take a look at this site http://www.zdspb.com/tech/skr03/trouble.html

 

[Todorov]

Thanks Everybody , Got ma shocker fixed

 

[Rimmington]

What was wrong with it?

 

[Todorov]

a few bits.... the reg needed tighteening , battery didnt help as wasnt powering the solinoid 100% and some orings changed....

 

[Todorov]

thanks for the link mate tht was a good help