shocker nxt

[chris98]

my shocker nxt has started leaking from the main regulator any ideas why?.
it did work then got put away for a few months, tried it again before i sold it off and know it leaks anybody else had the same trouble if so help.

 

[Alex R]

maybe the reg needs stripping, cleaning and re-lubing if been sat a while?

 

[soul snatcher24]

if it is leaking from the bleed hole on the side of the reg then it is probably the main regulator o ring (on the punger)

first try striping, cleaning and re lubing (as above), if that doesn't work then try replacing that o ring

hope this helps
soul snatcher24

 

[Biscuit]

checkout www.zdspb.com
this guy will have the answer on his site

 

[chris98]

checked out that site not bad at all i have striped the regulator down to the bear bones and replaced all the seals only to find it still leaks i thort it was coming from the hole in the end cap but i found out it is coming from a small crack in the end cap where the 90 degree macro screws in will try to seal it but i think i will be on the wanted page after an end cap
thanks for the help

 

[soul snatcher24]

if you have any locktight then that should seal it up no problem (only use blue though)

 

[chris98]

will try that at work tommorow i think thanks alot

 

[chris98]

locktight worked thanks alot soul snatcher24