shocker help.

[Big Mac]

right i have a hybrid 15 degree vertical adapter(frm, whatever you want to call it) and when put on the marker with the frame etc there is a gap between the frame and the sides of the frm (about 2mm) and so it moves from side to side.

is there anything i can do to stop this or is it a problem to do with the frame itself as i have another shocker with the exact same set up but the frame fits snugly inside the frm side bits.

any help is greatly appreciated

 

[Jacko]

is it the same make of frm on both guns?

 

[Big Mac]

yup both hybrid and have tried the other frm with this frame and its the same problem so i guess its the frame causing the problem. just hoping there is something that can be done

 

[Jacko]

have you tried putting a slightly bigger oring between the two?

 

[stelfe]

i had the same problem when i put one on my shocker, the gap is because the bolt hasnt closed up properly to the frame, i solved it by using the bolt and spring washer that came with the 15deg. and by adding the old spring washer from the original asa that i took off, and that sorted it for me.

 

[Big Mac]

right okay - whn i go get some allen keys this week ill get a spring washer - dont have one of those.

thanks very much - hopefully thats problem sorted