Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

shocker evolve bolt problem

S

Shocker_666

Registered Boozer
Jun 14, 2005
45
0
0
manc
got my evolve bolt, lubed it up put it in my shocker and cant seem to get it to cycle properly, it will move but not release air down the barrel, ive replaced the bolt sleeve o-ring and both the bolt guide o-rings and the inner firing can ones, and it still will not work no matter how high i raise the dwell, im running an input pressure of 200psi

ive searched for answers but found nothing that has solved the problem

pls help guys

cheers

matt
 
S

Shocker_666

Registered Boozer
Jun 14, 2005
45
0
0
manc
yer ryan cheers but thats the first place i looked, and spent most of this afternoon reading tech stuff on the site lol, and still couldnt get it to work.

Ca$hMoney thanks for the tip but would rather get this bolt working than shell out another 50 quid or so on another bolt lol
 
Mikey D

Mikey D

I suck
Sep 14, 2002
2,087
57
83
39
Birmingham
You have got the firing can on the right way? I made the mistake of putting it on reversed and it just farts.
 
Hairbear89

Hairbear89

Cornwall Paintball Club
Sep 25, 2004
199
7
28
35
Cornwall
Hmm...
I would say the o-rings, but you replaced them... Err... Just give it a general service. Clean the reg, check o-rings and what not. Also make sure she's lubed nicely; remember, the more the lube the better she slides ;)
Evolve bolts aren't too bad. I have one myself. Only things which I don't like are the break-in time and they tend to fanny with o-rings slightly. Oh also, make sure you havn't got a ****e load of lube in the holes on the bolt.
Keep me updated on this matey :(

Russ
 
S

Shocker_666

Registered Boozer
Jun 14, 2005
45
0
0
manc
well called evolve, they said that i need a new set of hard o-rings as the ones i have are too soft or something like that, so they are gonna sort it at CC,
great customer service i must say.
 
You must log in or register to reply here.
Top Bottom