Shocker Delrin bolt

[Helacious B]

Yeah I need to know how the hell i get off the old Shocker bolt because I bought a New Designs Delrin bolt and cant get the old one off...please help, do u need plyers and just twist it off or do u have to take a hairdryer to it for a lil bit to liquidize the loktite that might be in there?

 

[MRfixit]

At thew back of the bolt,the part you hold to screw into the gun there is a slot cutt into it,this will unscrew with a large screwdriver or a coin.This will give you access to inside the bolt,push the bolt backwards you shouls now see a screwdriver slot in the end of the bolt arm shaft,hold the bolt face & unscrew this piston.Take care not to loose any O rings etc.when it is unscrewed clean the threaded part & pull out of bolt assembly,lubricate the O rings,refit & screw new bolt on the threaded shaft.Hope this helps.

 

[bruce]

as above, but some times the bolt head is put on with loctite is so put it in a cup of boiled water to warm it up and loosen the bolt head before unscrewing it.

Just make sure you dont bend the bolt rod

cheers

bruce